ros环境设置,ros版本选择
终极管理员 知识笔记 54阅读
ROS 2 relies on the notion of combining workspaces using the shell environment.
ros2 依赖于“组合工作区”这个改变使用shell 环境来实现
“Workspace” is a ROS term for the location on your system where you’re developing with ROS 2.
工作区是一个术语是你在开发ros2过程中你的项目所在的位置
The core ROS 2 workspace is called the underlay. Subsequent local workspaces are called overlays. When developing with ROS 2, you will typically have several workspaces active concurrently.
ros2核心的工作区被叫做underlay后续本地的工作区被叫做overlays。 当在用ros2开发的时候我们 通常typically 会有几个当前活跃工作区在并行
Combining workspaces makes developing against different versions of ROS 2, or against different sets of packages, easier. It also allows the installation of several ROS 2 distributions (or “distros”, e.g. Dashing and Eloquent) on the same computer and switching between them.
结合工作区使解决不同版本的ros2或者是不同的包集合更容易。 可以让我们在同一个电脑上面安装不同的ros发行版并且进行切换
This is accomplished by sourcing setup files every time you open a new shell, or by adding the source command to your shell startup script once. Without sourcing the setup files, you won’t be able to access ROS 2 commands, or find or use ROS 2 packages. In other words, you won’t be able to use ROS 2.
这可以通过source 一个启动文件每次启动一个新的shell 或者是添加一个source 命令在我的启动脚本中。 如果没有source的话我们不能用ros命令或者是找不到包。 这个解释了我们为什么每次启动都要source一下环境
Prerequisites
Before starting these tutorials, install ROS 2 by following the instructions on the ROS 2 Installation page.
The commands used in this tutorial assume假设 you followed the binary packages installation guide for your operating system (Debian packages for Linux). You can still follow along if you built from source, but the path to your setup files will likely be different. You also won’t be able to use the sudo apt install ros-<distro>-<package> command (used frequently in the beginner level tutorials) if you install from source.
我们之前安装的时候用的不是source源而是直接使用二进制包的方式来安装的所以我们就直接按照这篇教程就可以
If you are using Linux or macOS, but are not already familiar with the shell, this tutorial will help.
避免每次都source ros2环境